The older you get the more likely you are to purchase the highest quality tools you can find because of the short lifetime and problems associated with the cheaper brands. As a young beginner, you're always short on money and have more new tools to acquire so you skimp on quality and end up paying the price. A lot of the real cheap foreign made tools, especially for working with plaster, drywall, and cement are made from the cheapest metal that only lasts a few uses before it starts to rust. Rust on your tools can be a problem in many situations, but on plaster tools, it's horrible because the roughness won't leave a smooth finish.
You Can Get By With The Cheap Metal If You Take Care Of It
The most important thing to do will be to always clean it after every use and even if you're going to be going to lunch as well. The problem is that there are alkaline chemicals in cement, plaster, and drywall patch that accelerate the rusting process rapidly. Even just a few hours can be a noticeable amount of oxidation.
So what you need to do with the cheap metal is wash it, dry it, and keep it in a zip lock bag away from moisture. If it does start to rust you can clean it off with steel wool and WD-40 to get it looking new again. If all of this sounds like a lot of work, it's because it is. You're better off investing in trowels, hawks, and other tools made from aluminium, magnesium, or stainless steel because they are immune to rusting.
Not only are aluminium and magnesium immune to rust but they are both much lighter than steel as well. The magnesium is even about 30% lighter than the aluminium if you really want to go lightweight. At first glance, you might wonder what the big deal is with the lightweight tools, but after you've held it in your hand for 4 hours straight, you'll see exactly why.
When It Comes To Plasterers Trowels There Are Several You'll Need
The first will be the pointing trowel that is typically used to work on small areas where you have to get in close and pay special attention. You'll want to make sure you get one with a comfortable handle that fits your hand well. Then you'll also need a window trowel that is used in tight places and gives excellent control.
Cornering trowels are of two types, one for the inside corner and another for the outside. They are indispensable for the quick work they do on corners. They give an exact angle with accuracy that is duplicatable on all of your corners.
And finally, you'll be using the finishing trowel the most of all. It is used to finish broad expanses of the wall to level it and smooth it to perfection. Make sure you get a comfortable grip because you'll be using this trowel often. The welds should not go all the way through the blade in order to have the smoothest action possible.
If you haven't purchased your plastering trowels and other tools yet, take a look at the range on offer at https://www.plasterers1stopshop.co.uk/. This is because there really is a difference and you'll see it immediately when you start working.
The author does not allow comments to this entry